Development of reel-to-reel microchip mounting system for fabrication of meter-long LED lighting tapes

We have developed a reel-to-reel microchip mounting system that continuously mounts LED chips and other microchips on meter-long flexible printed circuit board (PCB) tape for 1.2-m-long standard LED light tubes. Mounting microchips on meter-long PCBs is difficult because a large chip mounter is expensive and the chip positioning stage is difficult to move in a meter-wide area with an accuracy of hundreds of micrometers. Hence, we developed a new microchip mounting system that utilizes a small chip mounter and reel winding machines. The system repeatedly moves the long PCB tape by a certain length with the reel winding machines and mounts the chips on it. The PCB tape (which is 5 mm wide) is made by fabricating long PCB tapes which are 25 cm × 26.6 m through a roll-to-roll PCB process and slitting them into meter-long tapes. The reel-to-reel system repeatedly mounts chips by adjusting their positions through image processing of the copper wiring pattern on the PCBs. Our constructed system mounted 24 LED chips with a pitch of 5 cm with an accuracy of 0.082 mm to form a 1.2-m-long LED tape. The luminance of the tape is 12.4 lx at a distance of 1 m, which is the luminance of outdoor corridor lighting. Therefore, this system can be used for meter-long tape lighting.     

Two-stage pyrolysis of heavy oils. 3. Pyrolysis of tar-sand bitumens. Relation between ethylene yield and structural characteristics of heavy oils

Thermal cracking of tar-sand bitumens has been carried out using a two-stage pyrolysis reactor with temperature zones of 440°C and 750–800°C, respectively. Feedstocks were pyrolysed in the first stage into cracked oils, which were carried to the second stage for subsequent pyrolysis. Only 12–14 wt% of ethylene was obtained from tar-sand bitumens at the residence time of 1.2 s in the second stage, although 27 and 16 wt% were obtained from Taching and Iranian heavy vacuum residues, respectively. The tar-sand bitumens contain shorter paraffinic straight-chains and have more branched molecules than the vacuum residues of petroleum. A straight-chain paraffin index is proposed, with which a good correlation was obtained between ethylene yield and the fraction of straight-chain paraffin carbons in the heavy oil.     

Sterol composition of 19 vegetable oils

The unsaponifiables from 19 vegetable oils were divided into a sterol and three other fractions by thin-layer chromatography. All except olive and palm kernel oils gave the sterol fraction in a large quantity. Compositions of the sterol fractions were determined by gas liquid chromatography. Identification of each sterol was carried out by gas liquid chromatography and combined gas chromatograph-mass spectrometry. Campesterol, stigmasterol and β-sitosterol were present in all oils, and a minor amount of cholesterol in majority of the oils. Brassicasterol occurrence was widespread but its content was extremely small in oils other than rapeseed oil. Other sterols, presumably δ⁷-stigmastenol and δ⁵- and δ⁷-avenasterol were detected in most of the oils.     

Graft copolymerization of styrene onto cellulose acetate p-nitrobenzoate by chain transfer reaction

Styrene was grafted onto cellulose acetate p-nitrobenzoate (CANB) by chain transfer reaction of growing polymer radicals to the pendant nitro groups of CANB. A copolymer with a branch for every 17.2 nitro groups was obtained. This result indicates that the pendant aromatic nitro group is more effective in obtaining a graft copolymer by radical mechanism than pendant double bond on the trunk polymer previously reported, where graft copolymers with a branch for several hundred of double bonds are produced.     

Radiation-induced graft copolymerization of mixtures of styrene and n-butyl acrylate onto cellulose and cellulose triacetate

Mixtures of styrene and n-butyl acrylate of various compositions were grafted onto cellulose and cellulose triacetate fibers preirradiated with γ-rays at 0°C in air. Monomer reactivity ratios of the grafted copolymers were found to be different from those of the nongrafted copolymers or those of AIBN-initiated copolymers. The active species initiating the graft copolymerization were trapped radicals for cellulose and peroxides for cellulose triacetate. Kinetic investigations of the graft copolymerization of styrene onto preirradiated cellulose triacetate fibers were also carried out, and it was found that the kinetic scheme for radical polymerization is also applicable to graft copolymerization in a heterogeneous system.     

Reduction of fatty acid hydroperoxides by human parotid saliva

Arachidonic acid hydroperoxide (15-hydroperoxyeicosatetraenoic acid; 15-HPETE) was introduced into human parotid saliva and incubated at 37°C. Straight phase high-performance liquid chromatography analysis of the reaction mixture showed that 15-HPETE was detoxified to its reduced form, 15-hydroxyeicosatetraenoic acid, in the presence of glutathione. Therefore, it is concluded that human parotid saliva possesses fatty acid hydroperoxide-reducing ability. However, its effectiveness was found to be lower than that of blood plasma.     

Investigation of Ozone Loss Rate Influenced by the Surface Material of a Discharge Chamber

Decay characteristics of ozone concentration in oxygen in a chamber with three types of wall material (stainless steel, copper, and aluminum) are measured using the 254 nm photoabsorption method. Effective lifetimes of ozone are estimated from decay curves of ozone concentration. These values depend on the wall material: They are largest for stainless steel and smallest for aluminum. The relationship between effective lifetime and gas pressure is investigated precisely to determine three values. The equivalent diffusion coefficient of ozone in oxygen and the reflection coefficient of ozone at the wall correspond to the loss rate of ozone at the wall. The collisional loss (quenching) rate coefficient of ozone in oxygen is also determined.     

Triterpene alcohols and sterols of Spanish olive oil

Nine Spanish olive oils, including three each of virgin (pressed oil), refined virgin, and B-residue (solvent-extracted pomace oil) oils from different commercial sources, have been analyzed for their unsaponifiable matter (USM). Four sterolic fractions separated from the oils have been analyzed by preparative thin-layer chromatography (TLC); these fractions are triterpene alcohols, 4-methylsterols, sterols and triterpene dialcohols. The compositions of the four sterolic fractions were determined as their acetates by gas-liquid chromatography (GLC) on an OV-17 glass capillary column. Identification of each component was carried out by argentation TLC, GLC and combined gas chromatography-mass spectrometry (GC-MS); 44 components were identified, of which four: 24-methylene-31-nor-9(11)-lanostenol, 24-methyl-31-nor-E-23-dehydrocycloartanol, 24-ethyl-E-23-dehydrolophenol and 5,E-23-stigmastadienol, were considered to be new sterols from natural sources. Several characteristics, including the content of triteterpene dialcohols in the USM and that of C-24(28) unsaturated sterols in each of the four sterolic fractions, which can be used to distinguish between virgin and B-residue olive oils, were observed.     

Hydrophobic effects on protein/nucleic acid interaction: enhancement of substrate binding by mutating tyrosine 45 to tryptophan in ribonuclease Tl

Hydrophobic effects on binding of ribonuclease Tl to guaninebases of several ribonucleotides have been proved by mutatinga hydrophobic residue at the recognition site and by measuringthe effect on binding. Mutation of a hydrophobic surface residueto a more hydrophobic residue (Tyr45 – Trp) enhances thebinding to ribonucleotides, including mononucleotide inhibitorand product, and a synthetic substrate-analog trinudeotide aswell as the binding to dinucleotide substrates and RNA. Enhancementson binding to non-substrate ribonucleotides by the mutationhave been observed with free energy changes ranging from –2.2 to – 3 .9 kJ/mol. These changes are in good agreementwith that of substrate binding, –2.3 kJ/mol, which iscalculated from Michaelis constants obtained from kinetic studies.It is shown, by comparing the observed and calculated changesin binding free energy with differences in the observed transferfree energy changes of the amino acid side chains from organicsolvents to water, that the enhancement observed on guaninebinding comes from the difference in the hydrophobic effectsof the side chains of tyrosine and tryptophan. Furthermore,a linear relationship between nucleolytic activities and hydrophobicityof the residues (Ala, Phe, Tyr, Trp) at position 45 is observed.The mutation could not change substantially the base specificityof RNase Tl, which exhibits a prime requirement for guaninebases of substrates.     

Mechanisms of aerosol deposition in a nasal model

Total and regional aerosol deposition were investigated in a model of a normal human nasal airway. Contributions of fluid turbulence and particle inertia were evaluated using monodisperse aerosols. At fixed turbulent flow conditions, deposition percentage increased with particle size greater than 1 μm, suggesting that turbulent inertial deposition is a primary mechanism.

With same size aerosol, deposition increased with increasing fluid turbulence but its contribution was less with larger size aerosol. Turbulent diffusion was the dominant transport mechanism for particles less than 1 μm, where deposition decreased with particle size. Two major deposition sites were visualized with radio-aerosol in the anterior region of the nasal airway. One is close to the ostium internum where turbulent eddies are well developed, and the other is the anterior region of the middle turbinate where direction of airflow changes from upward to horizontal.